Please note: While these Termination Instructions offer a helpful guide, they should always be used alongside current connector system manufacturing instructions for best results.
About the Termination Instructions
These Termination Instructions are iIntended solely for terminating Gore’s Ethernet cables with the plug and receptacle versions of the TE Connectivity® CeeLok FAS-T® Connector System. They first detail the tools and materials you’ll need, which include:
- Crimpers (M22520/2-01)
- Positioner (K1850)
- Clamp tool (Tie-Dex® II)
- Copper foil tape (3M-3313)
- Insertion/extraction tool (DHK 696)
- Braid brush and probe/pick
- Needle nose pliers, scalpel, cutters, tweezer scissors and hand strippers
Preparing the cable and parts, terminating the plug connector (Termination A) and receptacle connector (Termination B), closing the connectors, and performing required testing are all covered thoroughly with easy-to-follow, step-by-step instructions and visual aids, like photos and illustrations, to help you ensure proper termination.
Performing Required Testing
You should perform all required testing. Gore recommends the assembly should, at the minimum, be verified for proper wiring and continuity, and checked for shorts. You may be required to complete additional testing by local authorities and/or end-users.
Contact a Gore Representative for More Information or Assistance
Terminating Gore’s aerospace wires and cables properly with connectors ensures high-speed data transmission with optimal signal integrity. These assembly termination instructions should only be used for GORE Aerospace Ethernet Cables with the TE Connectivity® CeeLok FAS-T® Connector System. To learn more about Gore’s high-speed data cables or to request complimentary samples in 48 hours, contact a Gore representative.